Patch Bays

$19.00$46.00

Make connecting to your pedalboard a snap with Saturnworks patch bay pedals.

Clear
SKU: N/A Category:

Description

Make moving your pedalboard a breeze with Saturnworks patch pedals. Patch pedals simplify your setup by bringing all your connections to one spot on your board.

2, 3, 4 & 5 Patch + Locking Patch

The standard 2 and 3 channel patch pedal measure 3.6” x 1.5″ x 1.2” (1590A enclosure). The 3 channel patch with isolated (plastic) jacks measures 4.39″ x 2.4″ x 1.24″ (1590B enclosure). The micro 2 patch measure 2″ x 2″ x 1.3″ (1590LB enclosure). The 4 and 5 channel versions measure 4.39” 2.4″ x 1.24” (1590B enclosure). The five channel isolated patch measures 4.8″ 2.64″ x 1.59″ (125B enclosure).

The 2 channel patch with locking input features a locking jack that firmly locks your input patch cable in place. No need to worry about accidentally unplugging your guitar during those epic rock-outs. Know you’re securely connected to your board with a locking input jack. The locking 2 channel patch pedal measures 4.8″ 2.64″ x 1.59″.

The 4 patch makes the ‘4-cable method‘ (aka 4CM) easy to set up, having all your connections in one spot.

2-Patch + Summer/Splitter

The 2 channel patch pedal + splitter/summer has a toggle that switches between patch or summer/splitter modes. While in patch mode, the pedal is a 2 channel patch bay. In summer/splitter mode, the pedal is can be used either as a passive summer. For example, in summer mode it can be set up as a stereo to mono (2:1 TS TS to TS) summer. In addition, you can flip it around and use it as a passive splitter. Like any passive splitter, splitter mode is best with a buffered signal to avoid level/tone loss. This pedal is available with either a toggle or a footswitch.

sum patch

TRS to TS TS Separator/Combiner

Our TRS to TS TS separator/combiner inputs a TRS signal and separates the tip and ring signals into individual mono (TS) signals. Simply connect the TRS to TS TS separator/combiner in reverse to input two mono (TS) signals and output a single TRS signal. This pedal has no interaction or crosstalk between the two channels. Of course you need to use the proper TRS and TS cabling.

Saturnworks patch pedals use boutique-grade features and components including:

  • Sturdy cast-aluminum enclosures.
  • Heavy duty Neutrik jacks (Japanese Lumberg jacks on the micro 2-patch).
  • Passive designs do not require power.d
  • Handcrafted and bench-tested in the USA.
  • A 1-year warranty against manufacturing defects.

If you’re looking for an even higher quality premium pedal, we have a variety of customizations and premium upgrades available. We offer custom graphics or premium Switchcraft jacks and soft click latching switches, for example. Check out our upgrades and customizations page, or contact us for details.

In addition to our regular offerings, we can do higher capacity and custom patch pedals, with TRS and/or XLR connections or Neutrik plastic jacks (for ground isolation), by request. Please contact us for details on custom patch pedals.

Please note: The pedals in the images are stock photos and not the actual pedals you will receive. While we typically send the pedals as pictured, depending on availability, the pedals you receive may vary in their graphics, knob colors/type, and/or LED colors (where applicable). We have our graphics options here.

Additional information

Weight N/A
Dimensions N/A
Variations

2-channel, 2-channel w/ Upward Facing Jacks, 2-channel Micro Black, 2-channel TRS, 2-channel w/ Locking Input Jack, 2-channel Patch + Passive Splitter/Summer, 2-channel Patch + Passive Splitter/Sumer w/Switch, 3-channel, 3-channel Isolated, 4-channel, 4-channel w/upward jacks, 5-channel, 5-channel Isolated, TRS to TS TS Separator/Combiner